Instruction manual

Operation

AC-Q4x Family, Installation and user Manual

Page 21

. The secure user can

n access in any mode of operation. In normal mode the

us e primary code to gain entry. In secure

master user must have identical primary and secondary codes

d or

am mode

3.3

The de t factory setting for the normal / se

red.

xili lso be used to switch the

code. Refer to Setting the Auxiliary Mode, paragraph 4.8.

3.2.2 Secure User

A secure user must have a primary and secondary code assigne

and the two codes must not be the same

gai

secure er must use th

mode, the secure user must first enter the primary and then the

secondary code, in order to gain entry.

3.2.3 Master User

assigned. The codes are entered with the same proximity car

the s e PIN. The master user can gain access during any

of operation by entering their code only once.

3.3 WITCHING OPERATIONAL S MODES

The three modes of operation defined above, can be changed

through a few steps.

.1 From Normal to Secure Mode

faul cure code is 3838.

1) Enter the normal / secure code.

Mode

Door

Green

• Mode indicator will flash

Mode

Door

2) Depress the # key to confirm the Mode

change.

• Mode indicator is red.

Red

Mode Door

Red

The au ary input of the controller can a

mode of operation from secure to normal and vice versa, if the

auxiliary input is selected it de-activates the Norma/Secure mode