Instruction manual

Installation
2.2.2 Terminal Block Models
These controllers come with removable terminal blocks that are
pushed on pins on the motherboard of the controllers. Wire
according to the following steps:
3) Route the wires or cable through the large hole in the back
cover See
Figure 6. Connect the terminal blocks as shown.
4) Wire the cabling according to the following diagrams.
Wiring the Lock Strike Relay & REX (Figure 7)
Wiring for Auxiliary Input & Output (Figure 8)
Wiring for the BL-D40 External Sounder (Figure 9)
Figure 6: Connections to Terminal Blocks
Page 15 AC-Q4x Family, Installation and user Manual