Specifications

Programming
30 AC-F/G4x Family Installation and Programming Manual
5.4 Changing the Programming Code
• The code 0000 is not valid; thus, the programming code cannot be
erased.
• For wrong entries, you hear a long beep and the controller returns
to Normal mode.
To change the Programming code:
1. Enter Programming mode.
2. Press 3 to enter Menu 3.
The Mode indicator turns green.
3. Enter a new Programming code.
You hear three beeps.
The system returns to Normal mode.
5.5 Changing the Normal/Secure Code
• When the auxiliary mode is 1, 2, 3 or 4, the auxiliary input takes
priority over the Normal/Secure code.
• For wrong entries, you hear a long beep and the controller returns
to Normal mode.
• Code 0000 erases and deactivates the normal/secure code.
To change the Normal/Secure code:
1. Enter Programming mode.
2. Press 4 to enter Menu 4.
The Mode indicator flashes red.
3. Enter the new Normal/Secure code.
Mode
Door
Green
Mode
Door
Green
Green
Mode
Door
Green
Mode
Door
Green
Mode
Door
Red
Green