Instruction manual
Table Of Contents
- 1. General Information
- 2. Installation
- 3. Operation
- 4. Programming
- 4.1 INTRODUCTION
- 4.2 CHANGING THE OPEN CODE
- 4.3 CHANGING THE AUXILIARY CODE
- 4.4 CHANGING THE PROGRAMMING CODE
- 4.5 CHANGING THE NORMAL/SECURE CODE
- 4.6 CHANGING THE NORMAL/BYPASS CODE
- 4.7 SETTING FAILSAFE/SECURE OPERATION
- 4.8 SETTING AUXILIARY MODES
- 4.9 SETTING THE LOCKOUT FEATURE
- 4.10 BACKLIGHT and LED BEHAVIOR
- 4.11 ENROLLING CODES
- 4.12 DELETING CODES
- 4.13 RELAY CODES ASSIGNMENT
- 4.14 PIN CODE LENGTH / FACTORY DEFAULT SETTINGS
- 4.15 REPLACING A PROGRAMMING CODE
- 4.16 REPLACING A NORMAL/SECURE CODE
- Appendix A.
- Appendix A. Limited Warranty
- Appendix B.
- Appendix B. Technical Support
General Information
AC-F4x and AC-G4x Family Manual Page 4
1. General Information
1.1 INTRODUCTION
The AC-F4x series and AC-G4x series Access Control units are
waterproof stand-alone controllers. All the units are suitable for
both indoor and outdoor mounting. The unit(s) accepts up to 500
users and allows entry via a personal identification number (PIN)
and / or by presenting a proximity card.
1.2 CONTROLLER TYPES
The different types of control units described in this manual are:
• AC-F43 - PIN only
• AC-F44 - PIN and Proximity card
• AC-G43 – Mullion-Box PIN only
• AC-G44 - Mullion-Box PIN and Proximity card
Relay
Current
Backlight Keypad Type Proximity
AC-F43
2A
9
3X4 Standard
8
AC-F44
2A
9
3X4 Standard
9
AC-G43
2A
9
2X6 Mullion
8
AC-G44
2A
9
2X6 Mullion
9