Instruction manual
Table Of Contents
- 1. General Information
- 2. Installation
- 3. Operation
- 4. Programming
- 4.1 INTRODUCTION
- 4.2 CHANGING THE OPEN CODE
- 4.3 CHANGING THE AUXILIARY CODE
- 4.4 CHANGING THE PROGRAMMING CODE
- 4.5 CHANGING THE NORMAL/SECURE CODE
- 4.6 CHANGING THE NORMAL/BYPASS CODE
- 4.7 SETTING FAILSAFE/SECURE OPERATION
- 4.8 SETTING AUXILIARY MODES
- 4.9 SETTING THE LOCKOUT FEATURE
- 4.10 BACKLIGHT and LED BEHAVIOR
- 4.11 ENROLLING CODES
- 4.12 DELETING CODES
- 4.13 RELAY CODES ASSIGNMENT
- 4.14 PIN CODE LENGTH / FACTORY DEFAULT SETTINGS
- 4.15 REPLACING A PROGRAMMING CODE
- 4.16 REPLACING A NORMAL/SECURE CODE
- Appendix A.
- Appendix A. Limited Warranty
- Appendix B.
- Appendix B. Technical Support
Programming
AC-F4x and AC-G4x Family Manual
Page 41
Note:
It is recommended that a record be kept of added and deleted
users. This makes it easier to keep track of user slots’ status
(empty or not)
4.12.1 Standard Method for Deleting Codes
1) Enter the programming mode.
2) Depress 8 to enter Menu 8.
• The Mode indicator will turn red.
3) Enter the 3-digit user slot code to be deleted.
• The Mode indicator will flash red,
indicating the controller is waiting for
a programming code to confirm the
deletion.
If the user slot is empty, a long beep will be heard and the
controller will return to its normal mode.
4) Enter your programming code to confirm the deletion.
If the programming code is valid, three beeps will be heard
and the controller will return to its normal mode.
If the programming code is invalid, a long beep will be heard
and the controller will return to its normal mode.
4.12.2 Search Method for Deleting Codes
1) Enter the programming mode.
2) Press 8 to enter Menu 8.
• The Mode indicator will turn red.
3) Enter 000 for user slot.
? ? ?
0 0 0
Mode
Door
Green
Mode
Door
Red
Oran
g
e
Mode
Door
Red
Orange
Mode Door
Green
Mode
Door
Red Oran
g
e