Instruction manual
Table Of Contents
- 1. General Information
- 2. Installation
- 3. Operation
- 4. Programming
- 4.1 INTRODUCTION
- 4.2 CHANGING THE OPEN CODE
- 4.3 CHANGING THE AUXILIARY CODE
- 4.4 CHANGING THE PROGRAMMING CODE
- 4.5 CHANGING THE NORMAL/SECURE CODE
- 4.6 CHANGING THE NORMAL/BYPASS CODE
- 4.7 SETTING FAILSAFE/SECURE OPERATION
- 4.8 SETTING AUXILIARY MODES
- 4.9 SETTING THE LOCKOUT FEATURE
- 4.10 BACKLIGHT and LED BEHAVIOR
- 4.11 ENROLLING CODES
- 4.12 DELETING CODES
- 4.13 RELAY CODES ASSIGNMENT
- 4.14 PIN CODE LENGTH / FACTORY DEFAULT SETTINGS
- 4.15 REPLACING A PROGRAMMING CODE
- 4.16 REPLACING A NORMAL/SECURE CODE
- Appendix A.
- Appendix A. Limited Warranty
- Appendix B.
- Appendix B. Technical Support
Programming
AC-F4x and AC-G4x Family Manual Page 40
4.11.5 Search Method for Codes Enrolling
The code search method enables to quickly enroll a secondary
code for a user whose primary code is known and whose slot
number is unknown.
1) Enter the programming mode.
2) Depress 7 to enter Menu 7.
• The Door indicator will turn orange.
3) Enter the 3-digit user slot number 000.
• The Door indicator will flash orange.
The controller is now waiting for the
primary code of the user.
4) Enter the primary code belonging to the user who needs a
secondary code.
• The Mode indicator will flash red.
If the primary code entered is not
valid, a long beep will sound and the controller will wait
for a valid primary code.
5) Enter the code to be used as the secondary code.
If the secondary code is valid, the controller will beep three
times and return to its normal mode.
If the secondary code is invalid, the controller will produce a
long beep and will wait for a valid secondary code to be
entered.
4.12 DELETING CODES
There are two methods to delete primary and secondary codes: a
standard method and a search method. When deleting a user
slot, both the primary code and the secondary code are erased.
Mode Door
Green
Mode
Door
Oran
g
e
Mode
Door
Orange
Mode
Door
Red
Orange