Instruction manual

Programming
AC-F4x and AC-G4x Family Manual Page 39
4.11.4 Standard Method for Codes Enrolling
1) Enter the programming mode.
2) Depress 7 to enter Menu 7.
• The Door indicator will turn orange.
3) Enter the 3-digit user slot number into the memory
(from 001 to 500) so as to enroll a primary or
secondary code.
For example, the user slot 003 represents user no. 3.
4) At this time three possibilities exist:
a. If the selected slot has no primary code, the Mode
indicator will flash green, indicating
that the controller is ready to
accept a primary code.
b. If the selected slot already has a primary code, but no
secondary code, the Mode
indicator will flash red, indicating
that the controller is ready to
accept a secondary code.
c. If the selected slot already has a primary and secondary
code, a long beep will be heard and the controller will
return to its normal mode.
5) Enter the code to be assigned as the primary or secondary
code for this slot number.
If the code that is entered is valid, the Mode indicator will
cease flashing and the controller is ready for the next 3-digit
slot number (step 3) or depress the # key to move to the next
slot number (step 4). If you do not wish to continue enrolling
codes, depress the # key twice and the controller will return
to its normal mode.
? ? ?
Mode
Door
Green
Mode
Door
Oran
g
e
Mode Door
Green Orange
Mode Door
Red Orange