Instruction manual
Table Of Contents
- 1. General Information
- 2. Installation
- 3. Operation
- 4. Programming
- 4.1 INTRODUCTION
- 4.2 CHANGING THE OPEN CODE
- 4.3 CHANGING THE AUXILIARY CODE
- 4.4 CHANGING THE PROGRAMMING CODE
- 4.5 CHANGING THE NORMAL/SECURE CODE
- 4.6 CHANGING THE NORMAL/BYPASS CODE
- 4.7 SETTING FAILSAFE/SECURE OPERATION
- 4.8 SETTING AUXILIARY MODES
- 4.9 SETTING THE LOCKOUT FEATURE
- 4.10 BACKLIGHT and LED BEHAVIOR
- 4.11 ENROLLING CODES
- 4.12 DELETING CODES
- 4.13 RELAY CODES ASSIGNMENT
- 4.14 PIN CODE LENGTH / FACTORY DEFAULT SETTINGS
- 4.15 REPLACING A PROGRAMMING CODE
- 4.16 REPLACING A NORMAL/SECURE CODE
- Appendix A.
- Appendix A. Limited Warranty
- Appendix B.
- Appendix B. Technical Support
Programming
AC-F4x and AC-G4x Family Manual Page 22
The table below shows all the programming menus, with default factory codes and settings.
Default Menu
No.
Description
4 Digit 5 Digit 6 Digit 4-8 Digits
Page
No.
1 Change open code 2580 25802 258025 25802580 24
2 Change auxiliary code 0852 08520 085208 08520852 24
3 Change program code 1234 12341 123412 12341234 25
4 Change normal / secure code 3838 38383 383838 38383838 26
5 Change normal / bypass code - 26
6 Change door release time 0004 27
6 Define auxiliary inputs / outputs 2004 28
6 Set Lockout Feature 4000 36
6 Backlight and LED Behavior 5100 37
7 Enroll proximity cards, PIN or both - 37
8 Delete proximity cards or PIN - 40
9 Code assignment with
strike/auxiliary
- 43
0 Return to factory defaults /
Change PIN code Length
- 45
Table 1 programming Menu