User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
ViTrax™ Video Integration
AxTraxNG™ Software Installation and User Manual 91
3. Under
Enable Camera options by events
, select the Access Granted,
Access Denied, or Access Recorded checkbox.
4. Select a camera from the
Camera
dropdown.
5. Select a video option from the
Options
dropdown.
6. Select the Popup Enabled checkbox to enable local pop-up messages.
7. Under
Close window options,
select either Manually or By timer.
8. Click OK.
6.6.2 Alarm Event
Create alarm handler event based automatic camera activation.
To create alarm handler camera activation:
1. Open the
Alarm handler
window (see Section 5.9).
2. Select a camera from the
Camera
dropdown.
3. Select a video option from the
Options
dropdown.