User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
ViTrax™ Video Integration
84 AxTraxNG™ Software Installation and User Manual
6.2 Adding a Camera to the AC-525 Panel
Once a camera is physically installed, the system reads the camera on the
network and displays it in the tree.
Defining communication of AC-525 cameras to the ViTrax™ server is
performed physically between the camera and the AC-525 panel (see the
AC-
525 Hardware Installation Manual
).
To view and add a camera to an AC-525 panel:
1. In the Tree View, click AC Networks.
The available networks are listed in the display area.
2. Select a network.
3. Click the icon.
The
Cameras
window opens.
4. Select the Attached to AxTraxNG™ checkbox next to the camera you
wish to add to the system.
5. Click OK.
For a detailed description of how to add a camera to the AC-525 panels as
defined both in AxTraxNG™ and ViTrax™ applications, see Appendix E.
6.3 Linking a Camera to AxTrax
When a camera is linked to AxTrax, video events can be linked to access
control events and vice versa.
To link a camera to AxTrax:
1. In the Tree View, select the
Camera
element.
2. On the toolbar, click the icon.
A window opens showing all available IP (not AC-525) cameras that can
be linked (cameras that have already been linked do not appear in this
window).