User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
ViTrax™ Video Integration
82 AxTraxNG™ Software Installation and User Manual
6. ViTrax™ Video Integration
ViTrax™ is a video management server client solution that supports AC-525, as
well as a wide range of IP, USB, and open protocol cameras, such as OnVif and
PSIA. For more information, see
ViTrax™ Software Installation Manual
.
Be sure that the ViTrax™ Server is installed on a PC and you know that PC’s IP
address. If not, refer to the
ViTrax™ Software Installation Manual
for
installation instructions.
Perform the following steps to integrate the ViTrax™ server.
Step Action Section
1
Connect to ViTrax™ Server
6.1
2 Add a Camera to AC-525 Panel 6.2
3 Linking a Camera to AxTrax
6.3
4 Use Panel Links 5.9 and 6.4
5 View Recorded Events
6.5
6
Use Automated Activation Options 6.6
6.1 Connecting to ViTrax™ Server
Define the ViTrax™ Server database with which the AxTraxNG™ Software
communicates.
To connect to the ViTrax™ server:
1. When the ViTrax™ Server is running, click File > ViTrax™ Server.
The
ViTrax™ Servers
window opens.
2. On the toolbar, click the icon.
The
Add
ViTrax Server
window opens.