User guide

How to Set Up a Site
AxTraxNG™ Software Installation and User Manual 81
4. Ensure that the Design Mode checkbox is checked.
5. Select readers, doors, inputs, outputs, additional status maps, cameras, or
panels and click the Add to Map icon from the toolbar menu.
The objects appear on the status map, and can be dragged to their correct
position.
6. Right-click a map object and select Show on Map from the shortcut
menu.
The
Show on Map window opens.
7. Select the Status checkbox to display the object’s state on the status
map.
8. For a door's Show on Map properties, select:
a. By Door Monitor: Shows the doors open status based on its physical
position.
b. By Output: Shows the doors open status based on the status of its
lock.
9. Select the
Alarm checkbox to enable a visual alarm on the map for alarm
events.
The alarm option is only available for panel elements where the alarm was
already defined.
10. Repeat Steps 5 to 9 until all objects are shown on the status map, as
required.
11. Repeats Steps 1 to 9 to set up additional status maps.
Status map icons can also be added to other status maps, indicating where
the two map areas meet.