User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
How to Set Up a Site
76 AxTraxNG™ Software Installation and User Manual
To define a car parking area:
1. Create an access area with Enter and Exit readers (see Section 5.13).
2. In the Tree View, select Car Parking.
3. On the toolbar, click the icon.
The
Car Parking
window opens.
4. In Description, enter a name of the car parking element.
5. In Access Area, select the relevant access area that you defined in Step 1.
6. In the Checked by area, perform one of the following:
a. Select Access Area.
i. In Area maximum counter, choose the number of parking
spots available in that access area.
ii. Click OK.
b. Select User Groups.
i. Click OK.
ii. In the Tree View, under Car Parking, choose the car parking
area you just created.
iii. On the toolbar, click the icon.
The
Car Parking Group
window opens.
iv. In Description, enter a name of the car parking sub-group.