User guide

How to Set Up a Site
AxTraxNG™ Software Installation and User Manual 69
Field Description
Valid date > from
Select the date/time from when the user's access
rights begin.
Valid date > until
Select the date/time on which the user's access rights
end.
This field is only available when the checkbox is
selected.
Counter > Enable
Select the checkbox to set an access rights countdown
counter for this user (see Appendix E).
When the counter reaches zero, the user's access
rights end.
Counter > Set new counter
Select the checkbox to set a new countdown counter
value for this user (see Appendix
E).
Counter > Counter Value
Select a new countdown counter value for this user.
This field is only enabled when the
Set new counter
checkbox is selected.
Rights > Antipassback
immunity
Select the checkbox to override any Antipassback
restrictions for this user.
Rights > Extended door open
time
Select the checkbox to entitle this user to an extended
unlocked door duration. The extended duration is set
for each door. See Section
5.5.
Links > Access Granted
command
Select the checkbox to activate a link rule initiated by
access granted commands for this user (see Section
5.9).
Links > Access Denied
command
Select the checkbox to activate a link rule initiated by
access denied commands for this user (see Section
5.9).
Links > User selected Output
group
Select an output group for this user. The outputs are
triggered every time the user accesses a door, as
specified in the
Links window (see Section 5.9).
Links > Handicapped check-
box
Select the checkbox to activate a dedicated output a
short time after the door is unlocked (see Section 5.9).
5.12.2.2 Codes Tab
The Codes tab displays:
 The cards assigned to this user (up to 16 cards)
 The PIN code assigned to this user