User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
How to Set Up a Site
66 AxTraxNG™ Software Installation and User Manual
3. Configure the user and card properties as required, according to the field
descriptions in the table above.
4. Click OK to close the window.
The process may take a few minutes after which a dialog reports that the
operation has been completed.
5.11.1 Setting Card Automation
You can program the system to automatically keep track of any user card that
has expired because of non-use over specified period of time. Once detected,
this card can either be deleted automatically or you can be notified of it.
To set card automation:
1. On the Tree View, expand the Card element and click Card Automation.
The
Card automation
window opens.
2. From the Automation Type dropdown, choose the action to be taken
when a card has not been used in a certain period of time.
Delete card automatically
Ask before card deletion
Notify by email
Report in System Event Log only
3. From the Period spin box, choose the time period.
4. Click OK.