User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
How to Set Up a Site
AxTraxNG™ Software Installation and User Manual 65
Field Description
Sequential Users –
Rights
Define the users right properties:
• Antipassback immunity: Select the checkbox to override
any antipassback restrictions
• Extended door open time:
Select the checkbox to activate
the extended door option defined for each door
Sequential Users –
Pin Code
Select the checkbox to define automatic pin codes, select
between:
• Start from: Sequential pin code starting from a predefined
number based on a defined number of digits
• Random: Random pin codes where the only definition is
the number of PIN code digits
Sequential Users –
Valid date
Define the access right validity:
• From: Define the date and time to begin allowing access
• Until: Select the checkbox to define an end date for the
access right validity, then define the date and time
Sequential Users –
Links
Select the checkbox to define associated link commands:
• Access Granted command: Activate a user-defined set of
inputs or outputs for access granted events
• Access Denied command: Activate a user-defined set of
inputs or outputs for access denied events
• Handicapped checkbox: Activate a dedicated output a
short time after the door is unlocked. The outputs are set in
the Links window.
• User selected Output group: Select an output group for
this user. The outputs are triggered every time the user
accesses a door.
The operations, inputs, and outputs are defined in the Links
window (see Section
5.9).
Sequential Users –
Counter
Select the
Enable
checkbox to use the counter option then type
or select the counter number to be used for the first user
To add users and cards:
1. In the Tree View, select Cards.
2. On the toolbar, click the icon.
The
Add Users and Cards
window opens.