User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
How to Set Up a Site
56 AxTraxNG™ Software Installation and User Manual
Field Description
Source
Select the specific panel component that raises the event based on
the source type selected.
Up to 8 links can be created for each source type in the AC-225, AC-
425, and AC-525 panels. Up to 2 links can be created for each
source type in an AC-215 panel.
Event
Select the event type for the panel component
Event
Description
Type the link or event description
Enabled
Select the checkbox to enable the link rule
Generate Alarm
Select the checkbox to generate an alarm event in addition to the
link rule activity
Destination Type
Select the panel component type, which is to be activated by the link
rule trigger event
Destination
Select the specific panel component, which is to be activated by the
link rule trigger event
Operation
Select the operation performed by the destination panel component
Time
Define a duration timeframe for the operation. This box is only
available when a time-bound operation is selected
Time Zone
Select the time zone for which the link rule applies
PTZ Preset
position
(available with
AC-525)
Set the default preset PTZ (Pan, Tilt, Zoom) camera position
Note: To activate this feature, you must set the preset on
ViTrax.