User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
How to Set Up a Site
AxTraxNG™ Software Installation and User Manual 55
Field Description
Activity start
delay
Set the delay time before this input becomes active. Note that on
normally open input, the delay starts once the input contact is
closed. On normally closed input, the delay starts once the input
contact opens.
To configure an input:
1. In the Tree View, click AC Networks.
2. Select a network and expand a panel in the Tree View.
3. Select Inputs.
The available inputs are listed in the display area
4. Select an input from the display area and click Edit.
The
Input Properties
window opens.
5. Select an input and configure it as required.
5.8 Adding a Camera
See Chapter 6.
5.9 Adding Panel Links
Panel links are rules defining how the system should behave when events
occur in the access control panel.
The
Link Properties
window displays the following:
An event on a panel and the panel component to which the link response
applies
The required input or output response
Any alarm message to display on the current AxTraxNG™ Client computer
The
Add Link
window contains the following fields:
Table 12: Network > Panel > Links > Add Link Window
Field Description
Source Type
Select the panel component type, input, output, reader, and so on
which is the event source