User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
How to Set Up a Site
AxTraxNG™ Software Installation and User Manual 53
Field Description
Time
Set the number of minutes before a user can reenter using this
reader.
Facility Codes
Click and type the facility code (between 0-255). Up to four
different facility codes can be entered.
5.6.3 Access Event
The
Access event
tab in the
Reader
window defines the alerts pop-up windows
behavior on the local PC.
It contains the following fields:
Table 10: Network > Panel > Readers > Reader Properties > Access Event Tab
Field Description
Access Granted
Mark to checkbox to enable a pop-up window for Access
Granted event type alerts.
Access Denied
Mark to checkbox to enable a pop-
up window for Access Denied
event type alerts.
Access Recorded
Mark to checkbox to enable a pop-up window for Access
Recorded event type alerts.
Close window
Options
Once a pop-up is enabled, the close window options are
available.
Select one of two options:
• Manually: The operator is required to manually close the
pop-up window.
• By timer: The pop-up window closes automatically based
on the predefined timer.