User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
How to Set Up a Site
48 AxTraxNG™ Software Installation and User Manual
6. Click the
Options
tab.
7. Set the event filtering options for this panel.
8. Click OK.
The window closes and the configured panel is displayed.
5.5 Configuring the Doors
Each panel controls one to eight doors. Each door can be configured
individually.
The
Door Properties
window displays the following:
The settings for unlocking and relocking
The time available before the door relocks or records alarm events
The
Door Properties
window contains the following fields:
Table 7: Network > Panel > Doors > Door Properties
Field Description
Description Type a name for the door.
Auto-Relock Select the event that causes the door to relock automatically.
REX enabled
A Request to Exit unlocks the door for a user-defined duration. Select
the checkbox to allow Requests to Exit for this door. The location of
the door REX input depends on panel configurations; it can be seen
in the Panel properties window.
First person
delay on
automatic
unlock
Sets the door's behavior during an automatic unlock time zone.
Select the checkbox to require that during the selected Time Zone,
the door remains locked until the first user opens it. The automatic
unlock time zone is selected in Panel Links by selecting the output
corresponding to that door (see Section 5.9).