User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
How to Set Up a Site
AxTraxNG™ Software Installation and User Manual 47
Field Description
Full Upload Click Start to re-upload all events from panel memory. Use the
option only after consulting Rosslare's Technical Support.
Note: A full upload can take up to 3 hours.
User Counter on re-
enable the panel
This option allows you to reset the user counter to its starting
value in the event that a panel is disconnected and then
reconnected again.
This option is only visible when the Deduct User Counter
checkbox is selected in the
General
tab of the
Readers Properties
window (Section
5.6.1).
To edit a panel:
1. In the Tree View, click AC Networks.
The available networks are listed in the display area.
2. Expand a network.
3. Click Edit.
The
Panel Properties
window appears.
4. Click the
Antipassback
tab.
Each panel has individual antipassback settings for door antipassback
behavior.
5. Set the Antipassback behavior, according to the field descriptions in the
table.