User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
How to Set Up a Site
AxTraxNG™ Software Installation and User Manual 43
The
General
tab of the Door Controller
Panel properties
window contains the
following fields:
Table 4: Door Controller>Panel Properties>General Tab
Field Description
Description
Type a description for the panel
Panel Address
Type an address number for the panel
The network's address appears to the left of the panel address. Valid
entries are 1-32.
Enabled
Select the checkbox to activate this panel
Clear the checkbox if the panel is not connected
Hide events on
this PC
Select the checkbox to hide events originating from this PC
Type
Select one or two readers per door
Hardware
Version
Select the appropriate panel hardware type
Firmware
version
Upon selection of the hardware version, the field displays the current
firmware version
Boot loader
version
Upon selection of the hardware version, the field displays the current
boot loader version
Inputs
Displays the input connections for the panel
Outputs
Displays the output connections for the panel
Test
Click to test if that the panel is correctly connected to the computer
The Test Panel window displays hardware details, including hardware
type, firmware, and boot loader versions, and indicates whether a
reader or I/O expansion board is installed on the panel.