User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
System Overview
AxTraxNG™ Software Installation and User Manual 25
4. System Overview
AxTraxNG™ is controlled through a user-friendly interface, and comes with a
Tree View list of all aspects of the site setup and a toolbar for standard
operations.
4.1 Starting the Software
This section explains how to start the software and log in to the main window.
To start AxTraxNG™:
1. Double-click the AxTraxNG™ Client icon ( ) on the desktop, or select
the program from the Rosslare folder in the Start menu.
If the AxTraxNG™ server is installed on a different PC, the Server
connection dialog box appears.
If the AxTraxNG™ server is installed on the same PC, skip to Step
5 (after
the
Logon AxTraxNG™ Client
Dialog box appears).
2. Type the AxTraxNG™ server’s PC IP address in the IP Address text box.
3. Select the AxTraxNG™ server’s PC Port from the Port select box.
4. Click OK.
The Server connection dialog box closes and the
Logon AxTraxNG™ Client
dialog box appears.
5. Select an Operator name and enter a Password.