User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
Installation
18 AxTraxNG™ Software Installation and User Manual
If the AxTraxNG™ Server or Client setup detects a previous version of
AxTraxNG, a prompt appears asking if you want to upgrade AxTraxNG™ to
the newer version.
Upgrading to a newer version only uses current database information.
After upgrading the AxTraxNG™ version, check the panel’s firmware
version for both old and new installations and upgrade your firmware if
required.
If there is no SQL server installed, the Installation Requirements screen
opens.
The installation process of the two prerequisite applications begins.
Once these installations finish, the AxTraxNG™ Client installation begins.
3.3 Installing AxTraxNG™ Client Software
The installation wizard opens automatically once the prerequisite software is
installed.
If you are upgrading, the following screen opens: