User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
Cross Platform Camera Setup
AxTraxNG™ Software Installation and User Manual 123
d. Select the Attached to AxTraxNG™ checkbox next to the camera
you wish to add to the system
e. Click OK.
5. Set the camera properties in the AxTraxNG™ application:
a. In the Tree View, click AC Networks.
b. Expand a network and select a panel to configure.
c. Click the panel’s icon.
The available cameras are listed in the display area.
d. Select a camera row.
e. Click the Icon
The
Camera Properties
window appears.
6. Set the camera’s time zone and daylight savings behavior from the
Camera
screen in the AxTraxNG™ application (Step 1):
a. In the
Camera Properties
screen, click the
Time
tab.
b. Select the local Time Zone from the dropdown list.
c. If Daylight Saving Time is now active, select the Enable Daylight
Saving Time checkbox.
This advances the local time selected by 1 hour.
d. Click Apply or OK.
Daylight savings is currently not updated automatically by Windows. It is
therefore the user’s responsibility to enable or disable the daylight saving
time checkbox as necessary.
7. Set the camera’s time zone and daylight savings behavior from the
Camera
screen in the AxTraxNG™ application (Step 2):
a. In the Tree menu double click a Panel item and Select the Options
tab.
b. In the Time Zone section, define the time zone and Daylight Saving
Time to match that of the
Camera
properties from Step 6).