User guide
Table Of Contents
- 1. Introduction
- 2. Specifications and Requirements
- 3. Installation
- 4. System Overview
- 5. How to Set Up a Site
- 5.1 Adding Time Zones
- 5.2 Adding Holidays
- 5.3 Adding a Network
- 5.4 Adding Access Control Panels
- 5.5 Configuring the Doors
- 5.6 Configuring the Readers
- 5.7 Configuring the Inputs
- 5.8 Adding a Camera
- 5.9 Adding Panel Links
- 5.10 Creating Groups
- 5.11 Adding Users and Cards
- 5.12 Adding Departments, Users, and Visitors
- 5.13 Adding Access Areas
- 5.14 Adding Global Antipassback Rules
- 5.15 Car Parking
- 5.16 Adding Operators
- 5.17 Creating Elevator Control
- 5.18 Creating Status Maps
- 6. ViTrax™ Video Integration
- 7. Manual Operation
- 8. AxTraxNG™ Reports
- 9. Administrator Operations
- A. Firewall Configuration
- B. SQL Service Settings
- C. Network Configuration
- D. Restoring Factory Default Settings
- E. Configuring User Counters
- F. Cross Platform Camera Setup
- G. Enrolling Cards using MD-08 Desktop Reader
- H. SQL Server Installation Troubleshoot
- I. AxTrax.NET Watchdog
- J. Adding Custom Wiegand Formats
Network Configuration
AxTraxNG™ Software Installation and User Manual 117
To initialize and configure the remote modem:
1. In the Modem Configuration window, click the Remote modem tab.
2. In the Settings area, the initialization string is displayed in the window.
For most applications, the default initialization string of is sufficient.
3. Clear the Use default checkbox to allow adding or editing of the dialing
string. Then type the AT command in the Dialing string window.
4. In Number of rings to answer, set the number of rings before the
computer modem answers.
5. Connect the remote modem to the computer via the selected com port,
and click Apply to initialize the computer modem.
6. Click OK to initialize.
7. If a failure message appears, check the modem connections and repeat
the last steps.
You must perform the action twice at the PC side, to Initialize two MD-
N33s.
The MD-N33 and AxTraxNG™ software are now configured and ready.
You can now continue working using the AxTraxNG™ Adding New Panel
procedure.
To check the remote modem status:
1. When a panel is setting in a modem network, you can see the status of
the modem by clicking the phone icon in the toolbar.
2. There is a manual option to dial or disconnect the modem.