Installation guide

AC-215 Single and Double Door Access Control Unit
Hardware Installation Guide
28
3. Click OK .
4. Select the suitable MAC address from the MD-N32 list (The MD-N32's MAC
address should be labeled on the MD-N32's box).
At the "Configuration" area, type the IP Address and Subnet which the
network administrator supplied you.
At the "Port" field type 1000.
At the "Speed" area select the speed of your serial connection
(9600 / 19200 / 38400 / 57600).
Click the "Apply" key to send the configuration to the unit and wait for
following massage: