Installation manual

General Overview
Swipe Family Readers Installation Manual Page 5
2 General Overview
Mifare
®
Smart Card Fingerprint Swipe Sensor MOC Readers use
a Swipe type biometric sensor to check for 1:1 verification
between fingerprint data and a biometric template stored in a
Mifare
®
card. When verification is confirmed, the Reader then
transmits the Card ID or any ID stored in sector 0 or 15 to the
Access Controller, which compares the card ID to data stored
in the database and decides access granting.
The Readers are compatible with most Access Control
hardware, including the following hardware manufactured by
Rosslare Security Products: AC-015, AC-115, AC-020, AC-215,
AC-225, and AC-525.
2.1 Features
Mifare
®
Smart Card Fingerprint Swipe Sensor MOC Readers
include the following features:
• 3 different designs to accommodate customer
requirements and preferences
• 3 blue LEDs that flash in a pattern that leads users to swipe
fingers in the correct direction
• Designed for indoor use (swipe sensor protection required
for outdoor use)
• Support Back Tamper sensor and Tamper output signal
• Support Lockout feature for increased security
• Compatible with Mifare
®
(ISO 14443A) 1K and 4K cards
• Mifare
®
card followed by finger swipe reading
• Reads up to 2 fingerprint templates stored on the card
• Programmable data transmission formats
• Programmable LED control and buzzer control inputs
• Tamper output
• Compliant with the CE, UL, and FCC standards for
international distribution