User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HOMELOGIXTM QUICK REFERENCE
- 3. SPECIFICATIONS
- 4. USER MENU STRUCTURE
- 5. INSTALLATION
- 6. PROGRAMMING HOMELOGIXTM
- 7. INSTALLERS MENU
- 7.1 Accessing the Installer Menu
- 7.2 Change Code
- 7.3 Zones
- 7.4 Enrolling
- 7.5 Security
- 7.5.1. Exit Delay
- 7.5.2. Entry Delay
- 7.5.3. Auto Arming
- 7.5.4. Siren Time
- 7.5.5. Siren Mode
- 7.5.6. Relay Polarity
- 7.5.7. Local Siren
- 7.5.8. Supervision Time
- 7.5.9. Jamming
- 7.5.10. No Activity Time
- 7.5.11. Trouble Beeps
- 7.5.12. Bypass
- 7.5.13. Quick Arm
- 7.5.14. Panic Button
- 7.5.15. Duress Code
- 7.5.16. Alarm Cancel
- 7.5.17. Alarm Abort Time
- 7.5.18. Backlight Time
- 7.5.19. Hide Display
- 7.5.20. Key Beeps
- 7.6 Communications
- 7.7 Automation
- 7.8 Messages
- 7.9 Maintenance
- 8. READING THE EVENT LOG
- Annex I. ACCESSORIES
- I.1 HomeLogiXTM Compatible Detectors
- I.1.1. Wireless Passive Infra-Red (Motion) Detector
- I.1.2. Advanced Wireless Spherical PIR (Motion) Detector
- I.1.3. Magnetic Contact Sensor
- I.1.4. Glass Break Detector
- I.1.5. Universal Wire to RF (Two-Channel) Transmitter
- I.1.6. Smoke and Heat Detectors
- I.2 HomeLogiXTM Compatible Remotes
- I.2.1. Wireless 3-Button Remote Control Transmitter
- I.2.2. Wireless Emergency Panic Pendant
- I.2.3. 1, 2 or 4-Button Remote Controls
- I.2.4. HomeLogiXTM Compatible Wireless Siren
- I.2 HomeLogiXTM Compatible Remotes
- I.1 HomeLogiXTM Compatible Detectors
- Annex I. ACCESSORIES
Reporting codesREPORTING CODES
HomeLogiX Installer Manual Page 48
Annex III. REPORTING CODES
III.1 Reporting codes
The Table below provides a listing of the codes used to communicate with the CMS.
Code Index Programmable Feature Description CID Code
01
Burglary Event (Alarm for a zone)
E130
02
Burglary Restore (for a zone)
R130
03
Fire Event (Fire Alarm for a zone or from emergency button)
E110
04
Fire Restore (Fire Alarm for a zone or from emergency button)
R110
05 24 Hour zone Audible Alarm Event E133
06 24 Hour zone Audible Alarm Restore R133
07 24 Hour zone Silent Alarm Event E122
08 24 Hour zone Silent Alarm Restore R122
09
Wire Sensor Tamper Event (Zone Tamper Alarm)
E144
0A
Wire Sensor Tamper Restore (Zone Tamper Alarm)
R144
0B
Wireless Sensor Tamper Event (alarm for RF zone)
E383
0C
Wireless Sensor Tamper Restore (for RF zone)
R383
0D
RF Low Battery Event (for RF zone)
E384
0E
RF Low Battery Restore (for RF zone)
R384
0F
Loss of supervision – RF Alarm Event (for a zone)
E381
10
Loss of supervision – RF Restore (for a zone)
R381
11
Wireless Panic Alarm Event From Remote Control
E120
12
Sensor Trouble Event (No Activity Alarm)
E380
13
Sensor Trouble Restore (No Activity Alarm)
R380
14 Duress Report Event R121
15 Open Report Event (Disarm) E401
16 Close Report Event (Arm Away) R401
17 Partial Close Report Event (Arm Home) E456
18 Keys-witch O/C (Key-Switch Disarm) R409
19 Keys-witch O/C (Key-Switch Arm Away) E409
1A Keys-witch O/C (Key-Switch Arm Home) E442
1B Cancel Event (Alarm Cancel Report) E406
1C Silent Panic From Panel E122
1D Audible Panic From Panel E123
1E Quick Arm E408
1F Forced Arm E423
20 Remote arm/disarm (Disarm) R407
21 Remote arm/disarm (Arm) E407
22 RF receiver Jam Detect Event E344
23 RF receiver Jam Detect Restore R344
24 Low system battery Event (Panel Low Battery) E302
25 Low system battery Restore (Panel Low Battery) R302
26 AC Loss Event (Panel AC Failure) E301
27 AC Loss Restore (Panel AC Failure) R301
28 Tamper Event (Panel Tamper) E137
29 Tamper Restore (Panel Tamper) R137
2A Failure to communicate Event (Communication Failure) E354
2B Zone bypass Event E570
2C Zone bypass Restore R570