User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HOMELOGIXTM QUICK REFERENCE
- 3. SPECIFICATIONS
- 4. USER MENU STRUCTURE
- 5. INSTALLATION
- 6. PROGRAMMING HOMELOGIXTM
- 7. INSTALLERS MENU
- 7.1 Accessing the Installer Menu
- 7.2 Change Code
- 7.3 Zones
- 7.4 Enrolling
- 7.5 Security
- 7.5.1. Exit Delay
- 7.5.2. Entry Delay
- 7.5.3. Auto Arming
- 7.5.4. Siren Time
- 7.5.5. Siren Mode
- 7.5.6. Relay Polarity
- 7.5.7. Local Siren
- 7.5.8. Supervision Time
- 7.5.9. Jamming
- 7.5.10. No Activity Time
- 7.5.11. Trouble Beeps
- 7.5.12. Bypass
- 7.5.13. Quick Arm
- 7.5.14. Panic Button
- 7.5.15. Duress Code
- 7.5.16. Alarm Cancel
- 7.5.17. Alarm Abort Time
- 7.5.18. Backlight Time
- 7.5.19. Hide Display
- 7.5.20. Key Beeps
- 7.6 Communications
- 7.7 Automation
- 7.8 Messages
- 7.9 Maintenance
- 8. READING THE EVENT LOG
- Annex I. ACCESSORIES
- I.1 HomeLogiXTM Compatible Detectors
- I.1.1. Wireless Passive Infra-Red (Motion) Detector
- I.1.2. Advanced Wireless Spherical PIR (Motion) Detector
- I.1.3. Magnetic Contact Sensor
- I.1.4. Glass Break Detector
- I.1.5. Universal Wire to RF (Two-Channel) Transmitter
- I.1.6. Smoke and Heat Detectors
- I.2 HomeLogiXTM Compatible Remotes
- I.2.1. Wireless 3-Button Remote Control Transmitter
- I.2.2. Wireless Emergency Panic Pendant
- I.2.3. 1, 2 or 4-Button Remote Controls
- I.2.4. HomeLogiXTM Compatible Wireless Siren
- I.2 HomeLogiXTM Compatible Remotes
- I.1 HomeLogiXTM Compatible Detectors
- Annex I. ACCESSORIES
INSTALLERS MENU
HomeLogiX Installer Manual Page 36
7.8 Messages
Change
Code
Zones Enrolling
Security Communications
Automation
MESSAGES Maintenance
Keypad Mute
House Name
Custom Zones
The seventh sub menu is Messages, which deals with custom text and voice zone
descriptions, Personal messages between users and message mute options. Browse
the desired setting, as described in detail ahead, using the Menu button, press the
Enter button to access it.
7.8.1. Keypad Mute
This option allows you to enable or disable the option to mute all the voice messages
and beeps (except for trouble beeps) by numeric key 5 of the keypad as described in
the
Keypad Operated Functions section above. By default, this option is Disabled.
To set up keypad mute:
Using the Menu button, Enable or Disable the option and press Enter to confirm your
selection.
7.8.2. House Name
Enables you to record and listen to the House Name of the system.
To record a House Name message:
1. In the Installer Menu, select Messages.
2. Page till you get to House Name menu.
3. In the House Name menu, select ENTER TO RECORD.
4. Press Enter to start and stop recording.
5. Press ENTER TO LISTEN after a recording has been entered.
7.8.3. Custom Zones
Enables you to record and listen to five voice and text custom zones descriptions and
to toggle between them. On each zone, the user can simply edit the text by typing
the keypad buttons, the text is limited to 16 characters.
To record a Custom Zone message:
1. In the Custom Zone menu, select a Custom Zone.
2. Press ENTER TO RECORD.
3. Press Enter to record the next zone.
4. Repeat 5 times.