User's Manual

INSTALLERS MENU
HomeLogiX Installer Manual Page 31
7.6 Communications
Change
Code
Zones Enrolling Security
COMMUNICATIONS Automation Messages Maintenance
System Telephone
Private Report
CS Report Setup
Line Test
AC Fail Report
2WV SETUP
Fax Defeat
Number of Rings
The fifth sub menu is Communication, which deals with the setup of system
communications parameters and settings with the outside world. Browse the desired
communication related setting, as described in detail ahead, using the Menu button,
press the Enter button to access it.
7.6.1. System Telephone
This menu allows you to specify the telephone number used for the ring back option
when calling the system telephone.
To set up the system telephone:
Using the numeric keypad, enter the system telephone number and press Enter to
confirm. Press the pound key (#) to delete an existing number.
Note:
When setting up the system telephone, use a comma (,) to indicate a delay
when dialing a number.
7.6.2. Private Report
This menu enables you to set the private telephone report options as detailed below.
To set up private report:
Using the Menu button, select from the following options and press Enter to confirm:
Set Numbers, specifies the telephone numbers of the subscribers to which the system
reports. You can enter up to three numbers. Using the Menu button, choose between
number 1, 2 or 3 and press Enter. Using the numeric keypad, enter the telephone
number and press Enter to confirm. Press the pound key (#) to delete an existing
number.
Note:
When setting up the system telephone, use a comma (,) to indicate a delay
when dialing a number.