User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HOMELOGIXTM QUICK REFERENCE
- 3. SPECIFICATIONS
- 4. USER MENU STRUCTURE
- 5. INSTALLATION
- 6. PROGRAMMING HOMELOGIXTM
- 7. INSTALLERS MENU
- 7.1 Accessing the Installer Menu
- 7.2 Change Code
- 7.3 Zones
- 7.4 Enrolling
- 7.5 Security
- 7.5.1. Exit Delay
- 7.5.2. Entry Delay
- 7.5.3. Auto Arming
- 7.5.4. Siren Time
- 7.5.5. Siren Mode
- 7.5.6. Relay Polarity
- 7.5.7. Local Siren
- 7.5.8. Supervision Time
- 7.5.9. Jamming
- 7.5.10. No Activity Time
- 7.5.11. Trouble Beeps
- 7.5.12. Bypass
- 7.5.13. Quick Arm
- 7.5.14. Panic Button
- 7.5.15. Duress Code
- 7.5.16. Alarm Cancel
- 7.5.17. Alarm Abort Time
- 7.5.18. Backlight Time
- 7.5.19. Hide Display
- 7.5.20. Key Beeps
- 7.6 Communications
- 7.7 Automation
- 7.8 Messages
- 7.9 Maintenance
- 8. READING THE EVENT LOG
- Annex I. ACCESSORIES
- I.1 HomeLogiXTM Compatible Detectors
- I.1.1. Wireless Passive Infra-Red (Motion) Detector
- I.1.2. Advanced Wireless Spherical PIR (Motion) Detector
- I.1.3. Magnetic Contact Sensor
- I.1.4. Glass Break Detector
- I.1.5. Universal Wire to RF (Two-Channel) Transmitter
- I.1.6. Smoke and Heat Detectors
- I.2 HomeLogiXTM Compatible Remotes
- I.2.1. Wireless 3-Button Remote Control Transmitter
- I.2.2. Wireless Emergency Panic Pendant
- I.2.3. 1, 2 or 4-Button Remote Controls
- I.2.4. HomeLogiXTM Compatible Wireless Siren
- I.2 HomeLogiXTM Compatible Remotes
- I.1 HomeLogiXTM Compatible Detectors
- Annex I. ACCESSORIES
INSTALLERS MENU
HomeLogiX Installer Manual Page 24
7.4.4. Keypads
You can enroll up to four keypads. You can choose to remove enrolled keypads.
To enroll/remove a keypad:
• Select the required keypad location, #01-04 by either browsing the keys using
the Menu button or by entering the keypad’s number using the numeric keypad
• Enroll the keypad when the WAITING FOR SIGNAL option is displayed, When a
signal is detected you will be asked to press the Enter button to store and save
your selection
• If the selected location has a keypad enrolled, you will be asked whether you
wish to delete it. Press the Enter button to delete or the Quick (ESC) button to go
back
7.4.5. Repeaters
You can enroll up to four repeaters. You can choose to remove enrolled repeaters.
To enroll/remove a repeater:
• Select the required repeater location, #01-04 by either browsing the keys using
the Menu button or by entering the repeater’s number using the numeric
keypad
• Enroll the repeater when the WAIT FOR SIGNAL option is displayed, by activating
the tamper, When the signal is detected you will be asked to press the Enter
button to store and save your selection
• If the selected location has a repeater enrolled, you will be asked whether you
wish to delete it. Press the Enter button to delete or the Quick (ESC) button to go
back
7.5 Security
The following is a list of the various security features of the system.
Change
Code
Zones Enrolling
SECURITY Communications
Automation
Messages Maintenance