User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HOMELOGIXTM QUICK REFERENCE
- 3. SPECIFICATIONS
- 4. USER MENU STRUCTURE
- 5. INSTALLATION
- 6. PROGRAMMING HOMELOGIXTM
- 7. INSTALLERS MENU
- 7.1 Accessing the Installer Menu
- 7.2 Change Code
- 7.3 Zones
- 7.4 Enrolling
- 7.5 Security
- 7.5.1. Exit Delay
- 7.5.2. Entry Delay
- 7.5.3. Auto Arming
- 7.5.4. Siren Time
- 7.5.5. Siren Mode
- 7.5.6. Relay Polarity
- 7.5.7. Local Siren
- 7.5.8. Supervision Time
- 7.5.9. Jamming
- 7.5.10. No Activity Time
- 7.5.11. Trouble Beeps
- 7.5.12. Bypass
- 7.5.13. Quick Arm
- 7.5.14. Panic Button
- 7.5.15. Duress Code
- 7.5.16. Alarm Cancel
- 7.5.17. Alarm Abort Time
- 7.5.18. Backlight Time
- 7.5.19. Hide Display
- 7.5.20. Key Beeps
- 7.6 Communications
- 7.7 Automation
- 7.8 Messages
- 7.9 Maintenance
- 8. READING THE EVENT LOG
- Annex I. ACCESSORIES
- I.1 HomeLogiXTM Compatible Detectors
- I.1.1. Wireless Passive Infra-Red (Motion) Detector
- I.1.2. Advanced Wireless Spherical PIR (Motion) Detector
- I.1.3. Magnetic Contact Sensor
- I.1.4. Glass Break Detector
- I.1.5. Universal Wire to RF (Two-Channel) Transmitter
- I.1.6. Smoke and Heat Detectors
- I.2 HomeLogiXTM Compatible Remotes
- I.2.1. Wireless 3-Button Remote Control Transmitter
- I.2.2. Wireless Emergency Panic Pendant
- I.2.3. 1, 2 or 4-Button Remote Controls
- I.2.4. HomeLogiXTM Compatible Wireless Siren
- I.2 HomeLogiXTM Compatible Remotes
- I.1 HomeLogiXTM Compatible Detectors
- Annex I. ACCESSORIES
INSTALLERS MENU
HomeLogiX Installer Manual
Page 21
7.3 Zones
Change
Code
ZONES Enrolling Security Communications
Automation
Messages Maintenance
Zone #01-40
Zone Type
Description
Chime
No activity
This menu allows you to define each of the 40 available zones. You can define the
zone type, description, activity type and it’s audible chime indication.
To specify zones:
The second sub menu is ZONES. Select the required zone by either browsing all 40
using the Menu button or by entering the zone number using the numeric keypad.
Once in the desired zone, use the Menu button to browse the options, press Enter to
access the desired sub menu in order to define several characteristics as follows:
• Zone Type; select one of the following:
o Interior
o Perimeter
o Delay
o Fire
o 24 Hour Silent
o 24 Hour Audible
o Chime
Description; select one of 39 fixed descriptions or one of five editable custom
descriptions. HomeLogiX
TM
enables you to specify five custom zones, see Using the
Menu button, Enable or Disable the option and press Enter to confirm your selection.
• Custom menu on page
36, use the tables in SENSOR PLACEMENT and HELPFUL
REFERENCE TABLES on page
45
• Chime; select one of three chimes, or no chime. By default zone is “no chime”
• No Activity Time; select Enabled or Disabled, By default the option is disabled