User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HOMELOGIXTM QUICK REFERENCE
- 3. SPECIFICATIONS
- 4. USER MENU STRUCTURE
- 5. INSTALLATION
- 6. PROGRAMMING HOMELOGIXTM
- 7. INSTALLERS MENU
- 7.1 Accessing the Installer Menu
- 7.2 Change Code
- 7.3 Zones
- 7.4 Enrolling
- 7.5 Security
- 7.5.1. Exit Delay
- 7.5.2. Entry Delay
- 7.5.3. Auto Arming
- 7.5.4. Siren Time
- 7.5.5. Siren Mode
- 7.5.6. Relay Polarity
- 7.5.7. Local Siren
- 7.5.8. Supervision Time
- 7.5.9. Jamming
- 7.5.10. No Activity Time
- 7.5.11. Trouble Beeps
- 7.5.12. Bypass
- 7.5.13. Quick Arm
- 7.5.14. Panic Button
- 7.5.15. Duress Code
- 7.5.16. Alarm Cancel
- 7.5.17. Alarm Abort Time
- 7.5.18. Backlight Time
- 7.5.19. Hide Display
- 7.5.20. Key Beeps
- 7.6 Communications
- 7.7 Automation
- 7.8 Messages
- 7.9 Maintenance
- 8. READING THE EVENT LOG
- Annex I. ACCESSORIES
- I.1 HomeLogiXTM Compatible Detectors
- I.1.1. Wireless Passive Infra-Red (Motion) Detector
- I.1.2. Advanced Wireless Spherical PIR (Motion) Detector
- I.1.3. Magnetic Contact Sensor
- I.1.4. Glass Break Detector
- I.1.5. Universal Wire to RF (Two-Channel) Transmitter
- I.1.6. Smoke and Heat Detectors
- I.2 HomeLogiXTM Compatible Remotes
- I.2.1. Wireless 3-Button Remote Control Transmitter
- I.2.2. Wireless Emergency Panic Pendant
- I.2.3. 1, 2 or 4-Button Remote Controls
- I.2.4. HomeLogiXTM Compatible Wireless Siren
- I.2 HomeLogiXTM Compatible Remotes
- I.1 HomeLogiXTM Compatible Detectors
- Annex I. ACCESSORIES
SPECIFICATIONS
HomeLogiX Installer Manual Page 10
3. SPECIFICATIONS
3.1 RF Data
RF Unit Type Integrated RF transceiver (two-way) shielded super heterodyne, fixed
frequency
Antenna Type Printed PCB type antenna
Operating
Frequencies
433.92 MHz G series
868.35 MHz H series
Receiver
Sensitivity
Up to -68 dBm
Transmitter
Power
Up to +10 dBm, less based on country requirements
Range
(open field)
Up to 250 m in open space for detectors, and 110 m for hand-held
remote controls
RF Device ID
Coding
three-bytes non-replicated per sensor type, or multiples of 16 million
possible codes, make it almost impossible to have two like coded
transmitters
The HomeLogiX
TM
system has optimum range if installed according to the
manufacturer’s recommendations, though this range may be affected by radio noise
from high-power nearby sources, or interference with the signal (blocking) by large
metal surfaces, or multiple concrete walls.
3.2 Environmental Data
• Operation temperature: 0º – 60º C (32º F - 140º F)
• Storage temperature: -25 º – 70º C (-13º F - 158º F)
• Relative humidity: 85% at 30º C Non condensing
• Dimensions: 220mm (L) x 140mm (W) x 48mm (D) (8.7"(L) x 5.5" (W) x 1.9" (D))
• Weight: 595gr. (1.3lbs.)
3.3 Electrical Data
• Display: 2 Lines of 16 characters, backlit LCD
• Two fully programmable PGM open collector outputs, 200mA, PTC protected
• External Siren output of 1A relay
• Case tamper protection
• On-board, supervised wired zone and wired tamper inputs
• Local, 87dbA siren
• External power supply: 220VAC / 50Hz, 110VAC / 60Hz (15VDC, 800mA)
• Current consumption: 250mA (standby), 500mA (max)
• Auxiliary power output: 12VDC, 500mA max
• Internal backup battery: 800mAh for 2 hours standby, 2 hours full alarm