User's Manual

Communicating with the Panel
HomeLogiX Software Manual Page 32
e with the PC or
e from the
calendar.
he HomeLogiX
TM
Remote Programmer
efaults
anel’s settings to the factory defaults. For
To restore t
1. anel Tree, select the account panel.
Panel to Factory Defaults. You
3. You can check the box to synchronize the Date/Tim
you can uncheck this option and select a date/tim
4. Click OK.
The date and time from t
application are downloaded to the wireless panel.
6.7 Restoring the Panel to Factory D
You can restore an account p
example, you can use this feature for troubleshooting, by returning the
panel to the factory defaults and then changing one setting at a time.
he panel to factory defaults:
In the P
2. From the Actions menu click Restore
c n also activate this command bya right-clicking on the panel
account and choosing Restore Panel to Factory Defaults.
Figure 18 - Restore Factory Defaults Warning Window
The account panel properties are returned to their factory default
state.
6.8 Disconnecting a Panel
When the HomeLogiX
TM
Remote Programmer application has connected
to a wireless panel, most actions are not available until you disconnect
from the wireless panel. Use Disconnect after performing an upload or
download operation.
To disconnect from a panel:
1. In the Panel Tree, select the panel.
2. From the Actions menu, click Disconnect. You can also disconnect by
click the Disconnect button on the toolbar.
The panel is disconnected.