User's Manual

Editing a Panel Account
HomeLogiX Software Manual Page 23
Section Property
Item
Description
Secondary
Reporting
Options
to
Alerts, Bypass, Arm/Disarm, and Restore.
The list of event types which are reported
the Central Station using the secondary
number. The options are: Alarms, Troubles,
Reporting Mode This mode defines whether a message
a
rted
Attempts
reported to the Central Station will include
single event or multiple events.
Reporting
Protocol
Dialing
Defines the structure of the repo
messages. Current Option is: Contact ID
The number of attempts (1-16) made by t
panel t
he
o connect to the Central Station.
Days Between The number of days (1-30) between tests of
the line connecting to the Central Station.
number of minutes (0-240) after an AC
rted
rn
).
ication
Line Tests
Line Tests Time The time of day for testing the line to the
Central Station.
AC Fail The
Reporting Delay
(Minutes)
power failure before this event is repo
(assuming the AC power did not retu
during this period
Two Way
Voice
(2WV)
Define the way 2-Way Voice commun
is made, and set the preferences for th
feature.
is
Setup
CS 2WV Mode Installer can Enable/Disable the 2-Way Voice
.
panel waits for
Mode of the system in this menu via the PC
Click the drop-down menu and select which
option you want to use.
CS 2WV Timeout The Time that the HomeLogiX
(Seconds) 2WV actions from the CS.
Note:
1. The reporting mode in Central Station (CS) Settings
must be set to: "Multiple Events".
2. After changing any communication parameters via
the PC software, the installer must enter the installer
mode, and then return Normal mode in order for the
new communication parameters to take effect.