User's Manual

Editing a Panel Account
HomeLogiX Software Manual Page 19
urity
You can set the wireless panel to automatically arm or disarm for specific
nd ti an al
tate er c
activating t tate
o acces
• Click on a panel a nel Tree and then click
Se th
After modi tion (see
ving the
the properties you should st configuration to the
a nlo
in r
Section Property
Item
5.4 Sec
days a
alarm s
mes. You c
so the own
he alarm s
so set the time delay before activating the
an enter and exit the premises without
.
T s Security:
ccount in the Pa
curity below
fying the prope
e panel account name.
rties, remember to save the configura
Sa Configuration on page 12). Once you have finished modifying
also download the late
wireless p
The follow
nel (see Dow
g properties a
ading to a Panel on page 29).
e available under Security:
Description
Delays Exit Delay
(seconds)
During this period (1-99 seconds) after arming,
a zone violation will not set the alarm state.
During this period, a user may exit the premises.
Entry Delay
(seconds)
In the armed mode, this is the delay time
between violation of a zone and an alarm
event. During this period (1-99 seconds) a user
may disarm the panel.
The mode for this auto arming schedule. ThAuto-
rming
ay)
e
A
(D
Arm Mode
options are: Disabled, Home or Away.
Arm Time The time for automatically arming the wireless
panel for this day of the week.
Disarm Time The time for automatically disarming the
wireless panel for this day of the week. If the
disarm time is prior to the arm time, disarm is
performed on the following day.