User Manual

Emergency and Panic Functionality
SP-03V2 User Manual
Page 42
8. Emergency and Panic Functionality
8.1 Siren
There are two siren type, the Internal siren which is from the
panel, and the Emergency siren which is set up and configured
by the installer.
• Internal Siren – This is used in an emergency situation
where the user needs to urgently contact the Control
Center and is activated by pushing the Emergency button
on the panel.
• External Siren – The External siren is activated upon alarm,
emergency or violating a 24-hour zone, siren timeout is set
by the installer and turns off upon the disarm command
being entered.
The siren also features momentarily pulses (Squawk) for the
following events that can be enable according to the
requirements to:
o Arm Away (single pulse)
o Arm Home (single pulse)
o Disarm (dual pulse)
o Emergency alarm
o Trouble alert
8.2 Performing an Emergency Call
The SP-03v2 system enables the definition of an emergency
number (during installation) that is called when the user triggers
the emergency function.
To activate the emergency function:
1. Press for 2 or more seconds.
The system executes an emergency response according to the
panel’s emergency definitions, as set up during installation.
Typical responses include:
• Activating the sounder at any of the function options
• Reports an Emergency Event to the central station
• Reports to private telephone