User Manual

Security Panel Behavior and Modes of Operation
SP-03V2 User Manual
Page 41
If a zone of type Delay is violated while the system is armed
(except Instant Arming), the system does not enter Alarm
Mode during the Entry Delay period setting. If the delay period
finishes and the system still has not been disarmed, the system
enters Alarm Mode.
During Entry Delay, the system signals the panel to sound
warning beeps at two rates: slower rate and faster rate during
the last 10 seconds of the delay period.
The Entry Delay period is configurable from 1 second up until 99
seconds.
The default Delay period is 30 seconds.
7.5.2. 3.6.2. Exit Delay
Exit delay allows the user time to reach the door from the
panel when arming the system upon exit.
When arming a panel, the system ignores zone violations
during the Exit Delay period. Once the delay period is finished
the system enters armed mode.
The system may be disarmed during the Exit Delay period.
During Exit Delay, the system signals the panel to sound
warning beeps at two rates: slower rate and faster rate during
the last 10 seconds of the delay period.
The Exit Delay period is configurable from 1 second up until 99
seconds.
The default Exit Delay period is 30 seconds.