User Manual

Security Panel Behavior and Modes of Operation
SP-03V2 User Manual
Page 38
3. Using the numeric keypad enter a valid user or master
code. While entering the code each number entered is
indicated by an "*".
If the incorrect code is entered, the system announces
"Illegal Code" and displays "Wrong Code, Please Try Again".
If there is no activity for 10 seconds, the system returns to
normal operating mode.
4. Press until the BYPASS OPTIONS
screen is displayed.
5. Press
and to toggle
between the bypass options until the SET
BYPASS MAP is displayed.
6. Press
. The screen to select
the zone to bypass is displayed.
7. Press
and to toggle
between the zone to select or by entering
the zone number 01 - 16. Press
to select the zone.
8. Press
and to toggle
between the zone bypass options. Press
to select the option.
9. Press
until the standard
screen is displayed and the system returns
to normal operating mode.
To clear the bypass zones:
1. Press . The Master Menu option is
displayed.
2. Press
. The code prompt is
displayed.