User Manual
Table Of Contents
- 1. Introduction
- 2. Telephone Description
- 3. Making Telephone Calls
- 4. Programming Interactive Voice Response
- 5. User Menu Options
- 6. Pill Reminder
- 7. Security Panel Behavior and Modes of Operation
- 8. Emergency and Panic Functionality
Security Panel Behavior and Modes of Operation
SP-03V2 User Manual
Page 32
7. Security Panel Behavior and Modes of
Operation
This chapter describes the operating conditions for the system
and instructs the user how to place the security system in its
various security operational modes.
7.1 Alarm Mode
The SP-03v2 system enters Alarm Mode according to the
various events, zone types and arming mode defined during
system setup.
7.1.1. Alarm Mode Armed
When armed the system monitors zones for any violations or
intrusion events. Any zone violation or intrusion detection puts
the system into Alarm Mode.
When there is some system failure or system inconsistencies the
system enters into Trouble Mode. If the system enters Trouble
Mode and the system is armed the system also enters Alarm
Mode.
Upon entering Alarm Mode, or when trouble conditions occur,
the system performs the following possible actions as defined
by the system installer during system setup.
Upon entering alarm mode, the system:
• Reports an event to the central station
• Performs other reporting (cellular, private phone)
• Activates a siren (silent, local siren, external siren)
• Uses backup/secondary reporting options