User Manual
Table Of Contents
- 1. Introduction
- 2. Telephone Description
- 3. Making Telephone Calls
- 4. Programming Interactive Voice Response
- 5. User Menu Options
- 6. Pill Reminder
- 7. Security Panel Behavior and Modes of Operation
- 8. Emergency and Panic Functionality
User Menu Options
SP-03V2 User Manual
Page 22
not accept it. If there is no activity for 10 seconds, the
system returns to normal operating mode.
4. Press . The USER CODES screen is
displayed.
5. Press . The SELECT USER
CODE screen to set the first user code is
displayed.
6. Press and to scroll to the user
code being set.
7. Press to select the user
code. The screen to enter the code is
displayed.
8. Using the numeric keypad enter the four
digit user code and press .
Press
to delete an existing number.
The code is entered and the SELECT USER
CODE screen is displayed. Repeat steps 7-8
as required.
9. Press twice. The standard
screen is
displayed and the system returns to
normal operating mode.
5.4 Setting Date and Time
Note:
This feature can only be programmed by users with the
master code.
To set the date and time:
1. Press . The Master Menu option is
displayed.
2. Press
. The code prompt is
displayed.
3. Using the numeric keypad enter a valid master code.
While entering the code each number entered is indicated
by an "*".