User Manual

Telephone Description
SP-03V2 User Manual
Page 11
Event Display
Description
TRBL
The system has one or more of the following
problems:
• Low battery (system or sensor)
• Power failure
• Supervision failure
• RF jamming
• Tamper (system or sensor)
MEM
There is an alarm in memory.
2.5 Sound Indicators
The system and keypad emit the following sounds:
Sounds
Action
Single beep
A key is pressed. This feature is activated by the
installer.
Long beep
An invalid entry is entered.
Four short
beeps a
minute
Indicates that there is a problem.
This feature is activated by the installer.
Two short
beeps
A key is not pressed for 30 seconds or more (except
during Test mode). The system automatically exits the
current menu.
Short beep
every second
An exit/entry delay is activated. A beep is sounded
every 0.5 seconds during the last 10 seconds of delay.
Nine short
Beeps
The system arms when one or more zones are active.
The installer must program this feature.
Chime
A chime is activated. The system supports three
chime sounds which can be selected to be heard
when a zone is activated (violated) during disarming
or when receiving a status update. For example the
chime is sounded when the zone is triggered.