User Guide

PROGRAMMING
SP-03V2 Installation Manual
Page 47
5.4 Reminder Mode
Reminders are used by the elderly to remind them of which
medication to take, and when to take it. The Reminder Mode
enables the user to program the pill name (up to eight different pills),
and the time to take the dosage (maximum of 8 dosages per day).
The user can configure the reminders by the day of the week.
To enter the Reminder Mode:
1. Press Menu until the screen displays the current day of the week
in the second line of the screen. (The first line contains the date
and time.)Press Enter.
2. The program reminder is displayed on the screen. Press Enter to
start reminder programming.
3. Use the Up and Down buttons to locate the
FAIL REPORT submenu.
Press the Enter button to access the submenu.
• Use the Up and Down buttons to set the fail report flag to
ENABLED or DISABLED.
• Press Enter to confirm.
• If the flag was enabled, and the user failed to acknowledge
the flag (by pressing any key within a predefined number of
notifications), the system will send an Emergency Alarm
message to the Central Monitoring Station (CMS). This global
parameter is used by all reminders.
4. Use the Up and Down buttons to locate the
ALERT REPEAT submenu.
Press the Enter button to access the submenu.
• Use the Up and Down buttons to set the number of reminder
repetitions (between #03 and #12).
• Press Enter to confirm.
This option sets the number of times that the voice prompt (“Take
your pill”) is repeated.
5. Use the Up and Down buttons to locate the S
ET REMINDERS
submenu. Press the Enter button to access the submenu.
6. Set a pill reminder, Use the Up and Down buttons to select
reminder #1 through #8. Press the Enter button to access the
reminder settings:
• C
LEAR REMINDER – Click twice on Enter to clear the reminder.