User Guide

PROGRAMMING
SP-03V2 Installation Manual
Page 43
5.3.2 Defining User Codes
The SP-03V2 can hold up to 16 different users.
To Define a User Code:
1. Access the Master menu as explained on page 41.
2. Use the Up and Down buttons to locate the
USER CODES submenu.
Press the Enter button to access the submenu.
3. Use the Up and Down buttons to select the user number (from 01-
16) you wish to define.
4. Using the numeric keypad, type a 4-digit code and press Enter to
save. Press the pound key (#) to delete the last entered digit.
5.3.3 Setting Date and Time
Use the menu to set the system’s date and time.
To Set the Date & Time:
1. Access the Master menu as explained on page 41.
2. Use the Up and Down buttons to locate the
SET DATE & TIME
submenu. Press the Enter button to access the submenu.
3. Using the Menu button, select Date and Time, and press Enter.
4. The following options appear:
• Enter Time – Enter the time, using the alphanumeric keypad,
and press Enter.
• Day of the Week – Use the Up and Down buttons to scroll a day
at a time.
• Enter Date – Enter the date, using the alphanumeric keypad,
and press Enter to confirm.
• Date and Time Format – Use the Up and Down buttons to
choose the
DATE FORMAT and the TIME FORMAT:
o D
ATE FORMAT – Use the Up and Down buttons to specify the
format in which the date is displayed (DD-MM-YY or MM-
DD-YY), and press Enter to confirm your selection.
o T
IME FORMAT – Use the Up and Down buttons to toggle
between 24-hour format and AM/PM format and press
Enter to confirm your selection.