User Guide

PROGRAMMING
SP-03V2 Installation Manual
Page 40
Siren Test
The available sirens are activated in order to test them.
To test the sirens:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the M
AINTENANCE
submenu. Press the Enter button to access the submenu.
3. Select T
EST SIRENS.
4. Use the Up and Down buttons to select a siren from one of the
following sirens:
• Local Siren
• R. Siren (remote)
o Siren #01
o Siren #02
o Siren #03
o Siren #04
5. Press Enter to activate the sounder.
6. Press ESC to stop the siren.
Product Version
This menu allows you to display the system’s firmware version
number; this option is normally used if you are contacting support for
assistance.
To View the Firmware Version:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the M
AINTENANCE
submenu. Press the Enter button to access the submenu.
3. Select P
RODUCT VERSION.
4. Press ESC to exit.
Clear History Log
Deletes all the events within the history log file.