User Guide

PROGRAMMING
SP-03V2 Installation Manual
Page 38
5.2.7 Maintenance
The maintenance submenu allows you to restore the unit to factory
default settings. It also includes various system tests including: RF Test,
Test LED Indicators, and a test for All Sirens. Also in the maintenance
submenu are the product version display and the regional
telephone settings.
Factory Defaults
This option allows you to restore the default factory settings for the
system.
To restore factory default:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the M
AINTENANCE
submenu. Press the Enter button to access the submenu.
3. Select F
ACTORY DEFAULT.
4. Press the Enter button to confirm.
LAN Defaults
This option allows you to restore the LAN default settings for the
system.
To restore LAN default setings:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the M
AINTENANCE
submenu. Press the Enter button to access the submenu.
3. Select LAN
DEFAULT.
4. Press the Enter button to confirm.
RF Test
The RF test checks the signal strength of all the wireless devices
enrolled to the system. If a weak signal is detected, a repeater may
be used to improve the link quality. Otherwise, the battery should be
replaced.