User Guide

PROGRAMMING
SP-03V2 Installation Manual
Page 37
4. Use the Up and Down buttons to choose between ENTER TO RECORD
and ENTER TO LISTEN.
5. Press Enter to start and stop recording.
6. Press Enter to start and stop playback after recording.
Custom Zones
Enables you to record and listen to five voice and text custom zones
descriptions and to toggle between them. On each zone, the user
can simply edit the text by typing the keypad buttons, the text is
limited to 16 characters.
To record a Custom Zone message:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the M
ESSAGES submenu.
Press the Enter button to access the submenu.
3. Select C
USTOM ZONES.
4. Use the Up and Down buttons to select custom zone #1 to #5.
5. Use the Up and Down buttons to choose between E
NTER ZONE
NAME, ENTER TO RECORD and ENTER TO LISTEN.
• Enter Zone Name – Use the alphanumeric keypad to type the
custom name, and press Enter to confirm. Repeat for each
zone.
Note:
Press the alphanumeric keys repeatedly to scroll
between the numeric and alphabet values.
• Enter To Record – Press Enter to start and stop recording, wait
for a voice prompt and the LCD screen to show R
EADY. Once a
zone is recorded the system will automatically move to the
next zone.
• Enter To Listen – Press Enter to start and stop playback after
recording.
Note:
Reset to factory settings does not delete these
recordings.