User Guide

PROGRAMMING
SP-03V2 Installation Manual
Page 30
Private Report Settings
This menu enables you to set the private telephone report options as
detailed below.
To Define the Private Report Settings:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the C
OMMUNICATIONS
submenu. Press the Enter button to access the submenu.
3. Select P
RIVATE REPORT SETTINGS.
4. Use the Up and Down buttons to select from the following options
and press Enter to confirm:
• Set Numbers, specifies the telephone numbers of the
subscribers to which the system reports. You can enter up to
three numbers.
o Use the Up and Down buttons to choose between number
1, 2 or 3 and press Enter.
o Using the numeric keypad, enter the telephone number
and press Enter to confirm. Press the pound key (#) to
delete the last entered digit. The asterisk key (*) inserts a
comma.
Note:
When setting up the system telephone, use a
comma (,) to indicate a delay when dialing a
number.
• Report Options specifies the event groups that are included in
a report. Use the Up and Down buttons to Enable or Disable a
group, as required and press Enter to confirm:
o Alarms (enabled by default)
o Troubles (enabled by default)
o Alerts
o Bypass
o Arm/disarm
o Restore