User Guide

PROGRAMMING
SP-03V2 Installation Manual
Page 29
4. Use the Up and Down buttons to select one of the following
options and press Enter to confirm:
• On to turn the key beeps on
• Off to turn the key beeps off
5.2.5 Communications
The communications parameters include:
• System Telephone (SP-03V2’s own number)
• Private Report Settings (including two-way voice activation flag)
• Central Monitoring Station (CMS) Report Settings
• LAN parameters
• Line Test Period & Time
• Power (AC) Fail Report Delay
• Enable Fax Defeat
• Number of Rings
System Telephone
This menu allows you to specify the telephone number used for the
ring back option when calling the system telephone.
To Set Up the System Telephone:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the C
OMMUNICATIONS
submenu. Press the Enter button to access the submenu.
3. Select S
YSTEM TELEPHONE.
4. Using the numeric keypad, enter the telephone number and
press Enter to confirm. Press the pound key (#) to delete the last
entered digit.
Note:
When setting up the system telephone, use a
comma (,) to indicate a delay when dialing a
number.